Chris Kilpin Machinery

Pneumatic Gear Cropper

British Made

Graule KS Mitre Saw for Beading

Laser Line Generator Kit

Self Adhesive Teflon

Flip Stop Kits

FOM Panda 400 Up Stroke Saw

Jepson Dry Cutters

Brush Strip

Page Last updated 18/09/17

Pertici 332P Double Mitre Saw

Single Head Welder 

Please Call For Details and estimated Availability 01934 625850 

** Second hand Blades Second hand Groove Knives and Second hand Air Tools Sections**


  Second hand Machinery For Sale:

 

MLA A10 Copy Router 1

 

 

MLA A10 Single Head Copy Router 240V 

Great Little machine very capable 

Suitable for Aluminium or Plastics

  • Machine in Very Good Like New Condition 
  • x2 Pneumatic Clamps (All New Clamping Setup valve,cylinders, brackets etc.)
  • Two Hand Control
  • Made in 2004
  • Supplied with Operational Manual and Spanner for changing Cutter
  • Mist Spray for Aluminium can be fitted if Required
  • Rare 240V Machine uses standard 3 pin mains plug so can be used anywhere

Click to Enlarge:

 

 For Machine Info and Specs Please click here for info Sheet

 



 

All Machines after this point have been previously sold by us and are for reference of typical machines we sell 

 



 

 

sold 

   Pertici 332 P 3

 

Pertici 332P Double Mitre Saw 1997

Machine in Very Good Condition

Many new Parts Fitted

Machine fully Stripped down and repainted from bare metal

Can be Fitted with Mist Spray Units for Aluminium if required 

 

  • Machine in Very Good Condition, Looks like new
  • Machine stripped and Repainted back to bare metal 
  • Optionally can be Fitted New Mist Spray Units for Cutting Aluminium
  • New Motors Fitted
  • New Main Air Cylinders Fitted
  • New Control Valves
  • New FRL Unit
  • New Buttons on Control Panel
  • Air and Electrical Cabling to heads replaced
  • Bearings and Belts Changed
  • Machine Fully Serviced, Cleaned and Angles Reset
  • Good Quality Re-Sharpened Blades fitted
  • Pneumatic Clamps
  • 2 Hand Control (Newer Style Machine with Motors Starting when heads go down)
  • 3.2 Metre max Cutting length
  • Intermediate Profile Support
  • Blow Gun
  • 3 Phase Power and 6 Bar Air Supply Required
  • Machine Made in 1997
  • Please see below Spec Sheet for machine Capacities 

 

Click for full Machine Spec

Click to Enlarge:

 


 

sold 

Urban SV300 3 Corner Cleaner

 

URBAN SV300 3 Cutter set Corner Cleaner 3 Phase

  • Top and Bottom Grooving
  • 3 Cutter Set  capacity with selection Switch
  • Frame Pull infoot with pedal operation
  • New Groove Knives fitted
  • Profile Support Bar
  • Fully Guarded
  • 3 Phase Power and 6 Bar Air Supply Required

 

 

Click Here for Manufactures Original Sales Brochure 

 

   sold

DSC 2451

Pertici 332P Double Mitre Saw with Digital Read Out 1995

Fitted with Mist Sprays for Aluminium

Machine in Very Good Condition

 

  • Machine in Very Good Condition
  • Fitted with New Mist Spray Units for Cutting Aluminium
  • New Motors Fitted
  • New Digital Size display Fitted
  • Buttons Replaced on Control Panel
  • Bearings and Belts Changed
  • Machine Fully Serviced, Cleaned and Angles Reset
  • Guards Re-Painted
  • Good Quality Re-Sharpened Blades fitted
  • Top and Bottom Clamps (New Bottom Clamp Cyls)
  • 2 Hand Control (Newer Style Machine with Motors Starting when heads go down)
  • 3.2 Metre max Cutting length
  • Intermediate Profile Support
  • Blow Gun
  • 3 Phase Power and 6 Bar Air Supply Required
  • Machine Made in 1995
  • Please see below Spec Sheet for machine Capacities 

 

Click for full Machine Spec

Click to Enlarge:

 

 


 

   sold

 

 

 

DSC 1683

Pertici End Milling Machine ML120 With Quick Release Cutter System 1999

Fitted with Mist Spray for Aluminium

Machine in like NEW Condition 

 

  • Machine in Very Good Like New Condition
  • Manual Operation 
  • Quick Release Cutter System for quick Changing of Cutters
  • Multi Point Turret Style Depth Stop for multiple Profiles
  • Mist Spray System for Aluminium
  • Fully Guarded with Safety Switch
  • Horizontal and Vertical Pneumatic Clamps
  • Supplied with One Cutter sleeve with a Standard 90 Degree TCT Cutter 14mm Cut
  • 3 Phase Power and 6 Bar Air Supply Required
  • Machine Made in 1999
  • Please see below Spec Sheet for machine Capacities 

Click for full Machine Spec

Click to Enlarge:

 

 


 

 

sold 

   DSC 2233

Graule ZS170N Cross Cut Mitre Saw 1999

For Cutting Aluminium, Plastics and Wood

Machine in Very Good Condition with Many new Parts fitted 

 

  • Fitted with Pneumatic Clamps
  • Fitted with New Adjustable Front Guard
  • Machine Fully Serviced
  • Like New Swedex Saw Blade fitted
  • New Table
  • Belts and Spindle Bearings Changed
  • New contactor
  • New Brake Fan
  • New Clamping Cylinders
  • New Lower guard Casting
  • Repiped and new Mains Cable
  • New Ems Cover
  • New Aluminium Back Fences and Steel Mounting Plates
  • 3 Phase Power and 6 Bar Air Supply Required
  • Machine Made in 1999
  • Can Be fitted with Mist Spray if Required
  • Please see below Spec Sheet for machine Capacities 

Click for full Machine Spec

 

Click to Enlarge:

 

 


sold 

   Secondhand Graule ZS170N

Graule ZS170N Cross Cut Mitre Saw 3Kw 2002

For Cutting Aluminium, Plastics and Wood

Machine in Very Good Condition with Many new Parts fitted 

 

  • Fitted with Pneumatic Clamps
  • Fitted with New Adjustable Front Guard
  • Machine Fully Serviced
  • Like New Saw Blade fitted
  • New Table
  • Belts and Spindle Bearings Changed
  • New contactor
  • Repiped and new Mains Cable
  • New Ems Cover
  • 3 Phase Power and 6 Bar Air Supply Required
  • Machine Made in 2002
  • Fitted with Mist Spray
  • Fitted with 3Kw Motor
  • Please see below Spec Sheet for machine Capacities 

Click for full Machine Spec


 sold

DSC 1470

Graule ZS170N Cross Cut Saw 1998

For Cutting Aluminium, Plastics or Wood 

Ideal machine for cutting large profiles at all kinds of angles

Huge Value for Cutting Capacity and Ability 

Great second hand example thats very light use

Rare machine Secondhand

 

  • Complete with Stand, Pneumatic Clamps and Mist Spray for cutting Aluminium
  • Fully Serviced
  • New Table Insert
  • New EMS Cover
  • New Clamp Valve
  • New Lower Guard Casting
  • New Adjustable front Guard
  • New Coolant Bottle
  • New Piping
  • New Hydrocheck Bottle
  • Blade Re-Sharpened 
  • Fitted with Brake Motor from New
  • Ideal for Cutting Large Sections at all Kinds of angles
  • Typically used for the Fabrication of Conservatory Roofs and Architectural Aluminium
  • Machine in Very Good condition 
  • 3 Phase Power and Air supply Required

 

Machine Spec and Videos of Graule Saws in Operation

 

  

For Larger Pictures Please Click this link


  

sold

 

 

   Single Sided Groover

Single Sided Bench Mounted Groover

Ideal for reworks or odd sized frames

  • Machine in Good condition
  • Resharpened Groove Knife
  • Foot Pedal operated
  • Bench moucnted
  • 6 Bar Air Supply Required

Click to Enlarge:

 


sold 

   MLA A21 LS Copy Router 1

MLA A21 LS Single Head Copy Router 240V 2004

Can be fitted with Mist Spray for Aluminium if Required

Sought After Machine and in rare 240 Volt

Machine Fitted with Many new Parts including a New Motor and belt drive pulley

 

  • Machine in Very Good condition
  • New Motor and Pulley Fitted
  • New Drive Belt Fitted
  • New Bearings fitted in Spindle
  • New Gas Strut
  • New Pneumatic Clamp Cylinders and Clamp Pads
  • New Contactor Fitted
  • New Stylus Pin
  • New Stops and Kwik Handles
  • New 8mm Cutter Fitted
  • Supplied with a New Blank Template
  • x1 Copy Stylus
  • Fully Serviced
  • Year 2004
  • Supplied with Operational Manual and Tool Kit
  • 240V Single Phase Power and Compressed Air Supply Required
  • Optional Mist Spray for Aluminum can be fitted at Extra Cost

Click for full Machine Spec

Click to Enlarge:


sold 

   DSC 0477

Ex Demo Jepson Super Premium Dry Cutter 9435 240V

Complete with New 90T Jepson Blade

(Stand Sold Separately)

 

  • Machine in Very Good condition
  • New Operating Instrustions and Tools Supplied with Machine
  • Machine only a Few Months Old
  • New Standard Jepson 90T 355mm Dia blade Fitted
  • Fully Serviced
  • Bench moucnted
  • 240V

 

Click to Enlarge:


 

 soldMLA A21 LS COPY ROUTER Main

MLA A21 LS Single Head Copy Router with Mist Spray 3 Phase 2008

Fitted with Mist Spray for Aluminium 

Sought After well built Machine with excelent capacity 700mm Head travel

Machine in like new condition  

  • Machine in Very Good condition, Like New
  • Fitted with Mist Spray Kit for Aluminium
  • Supplied with standard flip stop bars which came with the machine from new
  • New Blow gun Fitted to the machine
  • New Gas Strut
  • New Mist spray block Fitted
  • New 8mm Cutter Fitted and with a extra 5mm Cutter
  • Supplied with Templates as pictured
  • x2 Copy Stylus Pins
  • Fully Serviced
  • Year 2008
  • Supplied with Operational Manual
  • 3 Phase Power and Compressed Air Supply Required

Click for full Machine Spec

Click to Enlarge:

 

For Larger Pictures Please Click Here


sold

 

 

   SML Silver P35 Double Mitre Saw 1

 

SML Silver P.35 Double Mitre Saw / Kombimatic DGS 350 Year 1997 350mm Bladed Double Mitre Saw

Heads will cut extremely close together,When the heads are moved close together

One head cuts first once thats completed its operation and is out the way the second head cuts.

Min. Cut 50mm at 90 Degrees

Min. Cut 230mm at 45 Degrees

Max. Cut 3230mm

  

  • 350mm Dia Saws Blades
  • 3.2M Cutting Length
  • Min Cut 230mm at 45 Degrees 50mm at 90 Degrees
  • New Micor Swedish Saw Blades Fitted
  • Very heavy Built Machine
  • Fully Serviced
  • All New Bearings and Belts
  • 2 Hand Control 
  • Low Pressure Clamping
  • Pneumatic Vertical Clamps 
  • Machine in Good condition
  • 3 Phase Power and Air supply required

 

Click for Machine Spec Sheet

 

Click to Enlarge:


sold 

   DSC 0533

 

 

Pertici 332IP Double Mitre Saw Fully Refurbished and updated, Like New Condition

Sought after machine, Compact and extremely versatile Sawing Machine

This is not like other machines that have just had a light cleaning

This Machine has been fully dismantled and then, Re-painted, Updated, Repaired

Then Fully tested and Recalibrated to cut accurately !

Please see various pictures below

Click here for Full Machine Spec

 

  • Machine Fully Refurbished
  • Re-Painted
  • Updated with 2 hand control
  • Low Pressure Clamping
  • Re-sharpened Blades, like brand new condition
  • Selection switches for each head to use one head at a time e.g for cutting long sections one end at a time by sliding material
  • Intermediate Profile Support
  • All new Pneumatic and electrical Control gear
  • All new cabling and piping
  • New Bearings and belts
  • New head winding cable
  • New Clamp Cylinders and clamp pads with blocking valves
  • New Front Clamps
  • NewMist sprays fitted for cutting aluminium with inline ball valves for when they are not needed
  • New Back Fences
  • New Motors
  • 3.2 Metre max Cutting length
  • Three Phase Power and 6 Bar Air supply required

 

Click to Enlarge:


sold 

   MLA A10 Main

Infismac FC1 / MLA A10 Single Head Copy Router

Sought after machine, Compact and extremely versatile  

Click here for Full Machine Spec

 

  • Machine in Very good condition has only seen light use
  • New Stand
  • All new switch gear and wiring
  • All new Pneumatics
  • New Lifting Gas Stut
  • x2 Pneumatic Clamps
  • 2 Hand operation
  • Mist Spray Cutter Lubrication System fitted with seperate on/off
  • New Cutter Fitted
  • Universal Copy Template Fitted
  • Three Phase Power and 6 Bar Air supply required

Click to Enlarge:


 

 sold  DSC05700

Pertici 332P Double Mitre Saw Fully Refurbished and updated, Like New Condition 

Sought after machine, Compact and extremely versatile Sawing Machine

This is not like other machines that have just had a light cleaning 

This Machine has been fully dismantled and then, Re-painted, Updated, Repaired

Then Fully tested and Recalibrated to cut accurately !

Please see various pictures below

Click here for Full Machine Spec

 

  • Machine Fully Refurbished 
  • Re-Painted
  • Updated with 2 hand control
  • Low Pressure Clamping
  • Re-sharpened Blades, like brand new condition 
  • Selection switches for each head to use one head at a time e.g for cutting long sections one end at a time by sliding material
  • Intermediate Profile Support
  • All new Pneumatic and electrical Control gear
  • All new cabling and piping 
  • New Bearings in Motors and Spindles
  • New head winding cable
  • New Clamp Cylinders and clamp pads with blocking valves
  • Mist sprays fitted for cutting aluminium with inline ball valves for when they are not needed 
  • High Back Fences
  • 3.2 Metre max Cutting length 
  • Three Phase Power and 6 Bar Air supply required
  • Optional stop for cutting Points for crucifix welding 

Click to Enlarge:


sold 

 Pertici 332IPPertici 332IP a

Pertici 332IP Double Mitre Saw

  • Fully Rebuilt Like New Condition
  • 4.5 Metre Cutting Capacity
  • Horizontal and Pneumatic Clamping with high / low pressure
  • Can operate one head at a time
  • 2 Hand Control
  • Mist Sprays with on/off valve for Blade lubrication
  • Hydro pneumatic cylinders for slow blade advance with quick return
  • Re-Sharpened good quality blades
  • 3 Phase power and air supply required 

 


sold

 

 

 

 

Main

 

Pertici P100 Single Head Copy Router

  • Heavy Duty Copy Router for Aluminium or PVC
  • Completely Rebuilt and Repainted
  • 2 Pneumatic Front Clamps
  • Machine in Mint Condition has had very little use
  • Mist Spray Fitted with coolant Bottle and off tap
  • New Gas Strut Fitted
  • New Bearings in Motor and spindle
  • All New Electric / Pneumatic control Gear and cabling etc.
  • New Metal Work Air Filter Regulator
  • New Nut and Collet
  • 2 Hand Control
  • Presure Switch Fitted for Saftey (Ensures clamps must be on)
  • 3 Phase and Air Required

 Click to Enlarge:

 


sold 

 

 

 

 

MLA PL13 Corner Cleaner 2006

Quick Change Cutter sets via sleeves Click to see

Top and bottom Grooving with option for bottom knife to be turned off for wood grain on white frames

CORNER CLEANER :

  • Feature groover
  • Automatic cycle
  • Pneumatic quick release cutter system
  • Pneumatic self centring
  • Select switch on bottom knife only
  • Single phase or three phase
Click to Enlarge:

 

sold

 

 

 

 

 

DSC05140

 

 

  • Bench Mounted
  • Single Phase
  • Manual Operation
  • Pneumatic Clamps
  • Cutters Not Included 

  

 


 sold

DSC05158

 

  • Pertici BS771 Semi Auto Beading Machine 
  • 2 Hand Control and Pneumatic Operation
  • Pneumatic Clamping Jig ( May need customising to suit bead)
  • Made in 2005
  • Three Phase and 6 Bar Air Supply required
  • Can Be Supplied with measuring stick if required

 

Click for machine Spec

 

 Click to Enlarge:


sold

 

  • 2 Head Drain Slot Machine (Top and Bottom heads)
  • Good condition
  • Pneumatic Clamp
  • Free Standing
  • 240 Volt Motors
  • Solid construction
  • Single Phase Power and Air Supply Required

 

 Click to Enlarge:

 

Click for Machine Spec 

 


sold

 

ELU KS101 V Notch Saw 1988

  • Three Phase
  • Like New Condition
  • Fitted with resharpened Blades
  • 2 Hand Control
  • Horizontal and Vertical Pneumatic Clamps
  • All New Electric Control Gear
  • All New Pneumatic Controls
  • Fully Repainted and serviced
  • Optionally can be fitted with mains powered laser line

 
Can also Be used to Mitre cut through profiles for picture framing and other applications when only a 45 degree mitre is required cuts the section and then leaves 45 on the end of the next peice to be cut speeding production

(Click to Enlarge)

vcut1  vcut2

 

Original sales brochure spec sheet 

Click to Enlarge:


 

 sold

Pertici 400IP Double Mitre Saw 11

 

  • Pertici 400IP Double Mitre Saw 5 Metre Cutting Capacity 
  • Built 2002
  • Hydro-Pneumatic Cylinders for Slow
  • Capable of Compound cutting as well as Standard Mitres
  • Horizontal and Vertical Pneumatic Clamps
  • Mist Spray Blade Lubricant System
  • Quick Advance option
  • 2 Hand Control
  • Machine comes with 2 sets of 400mm Blades 
  • Three Phase Power and 6 Bar Air Supply Required
  • Machine In Very Good Condition 

 

Click to Enlarge:

   

  

Click For Machine Spec Sheet

  

 


 

sold

DSC05085

 

  • URBAN SV320 Corner Cleaning Machine 1998
  • 3 Cutter Set Capacity on one Spindle
  • Top and Bottom Grooving
  • Top and Bottom Drills
  • Top and bottom hook Knives
  • All Cleaning Functions Manually selectable via front control panel 
  • Wide front Support Arm (Not Pictured)
  • Auto-Matic Cycle
  • PLC Controlled but manual Configuration / Setting
  • Three Phase Power and 6 Bar Air Supply Required
  • Very Good condition 

 

Click to Enlarge:

   

  

URBAN Sales Brochure for machine Spec

  

 


 sold

second hand jepson 1

  • Very Good Condition had very little use
  • Cuts Steel, Aluminium and Plastics
  • Typically used to cut window reinforcing steel
  • Fitted with New Jepson Blade
  • Single Phase
  • Bench Mounted

 

Click to Enlarge:

 

Click for Saw Information and demo Video

 

 


 

sold 

Used MLA M7G End Miller 05

 

  • MLA Bench Mounted Endmiller
  • Built Jan 2010
  • Single Phase
  • 90 Degree Milling
  • Manual Clamp
  • Complete with Support Arm
  • Mint Like New Condition, Had Very Little use

 

 Click to Enlarge:


 sold

 

Used for Crimping the Corners of Aluminium window section

  • Heavy Duty Steel Construction
  • Very Good Condition
  • Bench Mounted

 

 

Please call or email for details

 

 

 

 

 


sold 

DSC05106

 

  • Graule KS Mitre Saw 1993
  • 250mm Blade Capacity
  • Extremely Heavy Duty Construction built to last
  • Simple Operation
  • 3 Phase Direct Drive Motor
  • Bench Mounted

 

Click to Enlarge:

  

 

Click for Machine Spec

 


 

sold

URBAN AKS3610

 

Custom Modified to weld a 180 cill @ 45 Degrees

  • Fully Refurbished
  • Extremely heavy construction
  • Probably the best single head welder money can buy
  • For welding Corners,cills and butt joints
  • Single Phase and Air supply required

 


sold 

 

Used for Crimping the Corners of Aluminium window section

 

  • Sturdy Construction with high quality Cast Aluminium bed
  • Adjustable Crimping knives and v block positioning for easy setup
  • Very good condition

 

Call for Details 01934 625850

sold

1

Click to Enlarge:

 

Urban AKS 3710 Transom Welder with 0.2mm Close Limiting Knives

Capable of: 


Corner Welding
Transom Welding
Crucifix Welding
Variable angle corner / transom welding (see Variable Back fence photo)

 

  • New URBAN Temperature Controller
  • New URBAN Timers
  • New Thermocouple
  • Fully Serviced 
  • Repainted
  • Typical Bullet Proof URBAN Build Quality
  • 2 Hand Control 
  • Low Pressure Clamping
  • Foot Pedal
  • Additional Side Clamp
  • Support Arms



sold

 

Pertici P100 Single Head Copy Router

 

  • Heavy Duty Copy Router for Aluminium or PVC
  • Completely Rebuilt and Repainted
  • 2 Pneumatic Front Clamps With new Rubber Clamp Pads
  • Machine in Mint Condition has had very little use
  • Mist Spray Fitted with coolant Bottle and off tap
  • New Gas Strut Fitted
  • New Bearings in Motor and spindle
  • All New Electric / Pneumatic control Gear and cabling etc.
  • New Metal Work Air Filter Regulator
  • New Nut and Collet
  • 2 Hand Control
  • Pressure Switch Fitted for Safety (Ensures clamps must be on)
  • 3 Phase and Air Required

                       

                                                   

 

 


sold

 

MJ Auto Screw Driver

  • Re-Piped and Serviced
  • Fully Pneumatic



sold

 

Strifler 3 Head Drainslot Converted to Pneumatic Motors

 


  • Fully Rebuilt and Converted to fully Pnuematic operation by us in 2003
  • High Quality pneumatics and high end FRL fitted
  • 2 Hand Control
  • Low Pressure Clamping
  • Blow gun Fitted
  • In Very Good Condition
  • Fully Serviced and fitted with new Cutters


 
 

 
 

sold

Graule ZS170N Cross Cut Saw 1997

 

  • Supplied by us in 1997 from new
  • Complete with Stand, Pneumatic Clamps and Mist Spray for Ali
  • Fully Serviced
  • New Table Insert
  • New EMS Cover
  • New Hydro-check Cylinder
  • Blade Re-Sharpened (Original Graule Ali/PVC Blade Fitted)
  • Fitted with Brake Motor from New
  • Ideal for Cutting Large Sections at all Kinds of angles
  • Typically used for the Fabrication of Conservatory Roofs and Architectural Aluminium

Machine Spec and Videos of Graule Saws in Operation

  

 


  

sold

 

FC3E Copy Router with Triple Drill 2001

  • Centralizing Bars
  • 2 Hand Control
  • 2 Copy Pins
  • 2 Pneumatic Clamps
  • Very Good Condition
  • 3 Phase



 

sold

Pertici DGS 180

 

Pertici DGS180 Double Mitre Saw


  • 1988
  • Very Good Condition as you can see from the pictures (click to enlarge)
  • Machine Completely Rebuilt by ourselves in 2001 with all new pneumatics and electrics also repainted at the time
  • Machine has had very little use since then and has justbeen re-serviced inspected and cleaned blades resharpened etc. after coming back in
  • 2 Hand Control via saftey valve
  • Heads can Be Turned off individually
  • Point Stop (pictured)
  • Updated Guards Fitted



 

 sold

 

  • Someco LOLA Single Head Welder
  • Simple but beautiful machine in very good condition 
  • Manual clamps makes this machine very versatile and ideal for specials and odd sized frames as you have more control 
  • Great for any size fabricator 
  • Ideal for Reverse Butts, Corner Welding, Cill Welding and acute angles / curved frames
  • Very basic machine so very little to go wrong combined with its solid cast iron construction this machine will last for decades 
  • Turret Stop on setting plate to limit stroke
  • Single Phase and Air Supply Required

 

 


 sold

 

 

  • Pertici VC721 V notch Machine
  • Made in 1999 and in Mint Condition
  • 3 Phase Motors
  • 2 Hand control
  • Stop Can Be supplied with machine as pictured if required

Technical Info